Tags for Trail Runs
Trail runs may use either active tags, or dual B-tags
Dual B-tags
Trail run bibs have two ChronoTrack B-Tags tags fitted towards the edges of the back of each bib.
We recommend fitting your bib between hip and lower chest height to the outer clothing you will wear throughout the event.
Please attach the bib to your front.
Please do not cover your bib and tags.
UHF tag performance is adversely impacted by water. Do not cover your tags with a hydration system or drink bottles.
Tags can be damaged by bending or folding. Do not fold your tag.
Please click here to download PDF of fitting instructions
If you need help please see a timing official at your event for assistance
Active Tags
Attached by a strap and worn around your ankle.
Neoprene strap
Thread active tag onto strap through the tag's "wings". Firmly close velcro. Wrap strap around your ankle and firmly close strap.
Active tags will read straight out of the water and when covered by mud.
All neoprene straps we provide are new.
N.B. While event organisers may allow you to keep the neoprene strap, you must return the tag.
Please click here to download PDF of fitting instructions.
Please note that as grit and/or sand reduces the adhesive capability of velcro we recommend that if using your own strap you check your velcro prior to fitting the tag.
Disposable strap
Thread strap through active tag's "wings". Wrap strap around either ankle. Push clip through hole in strap and snap dome firmly shut. Please note that the strap will not stay on your ankle if you do not snap the dome firmly shut and you will lose the strap and tag.
Please click here to download PDF of fitting instructions.
N.B. while the strap is disposable you must return the tag.
If you need help please see a timing official for assistance.